Leica GPS1200 Series Technical Reference Manual page 828

COGO
Step Description
Two results are calculated.
3. COGO Brng - Dist Results, Result1 page
<Point ID:> The identifier for the first result of the COGO point
depending on the point ID template configured for <Survey Pts:> in
CONFIGURE ID Templates. The point ID can be changed.
<Ortho Ht:> or <Local Ell Ht:> are input fields. When entering the
Result1 page, the height of the first point used in the COGO calcula-
tion is suggested. A height value to be stored with the calculated point
can be typed in.
The calculated coordinates are displayed.
Type in a point ID.
COORD (F2) views other coordinate types.
STAKE (F5) to access the Stakeout application program and stake
out the calculated COGO point.
After staking, measuring and storing the COGO point COGO Brng -
Brng Results, Result1 page is displayed.
SHIFT ELL H (F2) and SHIFT ORTH (F2). Available for local coordi-
nates. Changes between the ellipsoidal and the orthometric height.
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
PAGE (F6) changes to the Code page where a code and attributes
can be selected.
GPS1200 828
19.1
43.4
19.1
11