Managing Reference Planes - Leica GPS1200 Series Technical Reference Manual

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Choose Task & Refer-

Reference Plane

Managing Reference Planes

A reference plane is used to measure points relative to the plane.

Measure to plane

Reference planes can be created, edited, stored and deleted in the active job.

The reference planes can be recalled for later use.

The plane can be shifted through a point or a defined offset.

To accept changes and to continue with the

subsequent screen.

SHIFT CONF (F2)

To configure the reference plane. Refer to

"42.3 Configuring Reference Plane".

Show Quick Links

Table of Contents