Determine Coordinate System - Normal
Description of columns
Column
Description
WGS84 Pts
The point ID of the points chosen from <WGS84 Pts Job:>.
Local Pts
The point ID of the points chosen from <Local Pts Job:>.
Match
The type of match to be made between the points. This information is used
in the transformation calculation. Position & Height, Position only, Height
only or None.
•
For <Transfrm Type: Onestep> or <Transfrm Type: Twostep>
possible options are P & H, P only, H only or None.
•
For <Transfrm Type: Classic 3D> possible options are P & H or
None.
None removes matched common points from the transformation calcula-
tion but does not delete them from the list. This can be used to help
improve residuals.
SHIFT PARAM (F5)
Available for <Transfrm Type: Classic 3D> in
DET C SYS Step 1: Choose Transform
Type. To configure Classic 3D transformation
parameters. Refer to "38.3.1 Configuring
Determine Coordinate System - Normal" para-
graph "DET C SYS Configuration, Classic 3D
page".
GPS1200
953