COGO
Step
Description
The values for the azimuth, the distance and the offset can be math-
ematically modified.
SHIFT MODIF (F4) when <Azimuth:>, <HDist-XX:> or <Offset:> is
highlighted. To add, subtract, multiply and divide values.
4.
Is the COGO point a foresight?
•
If yes, CALC (F1).
•
The result is calculated and displayed in COGO Traverse
Results. After storing the result and returning to COGO Traverse
Input, Input page, the point displayed in <From:> is the newly
calculated COGO point. The next COGO calculation can be
continued from this new point.
•
If no, SSHOT (F3).
The result is calculated and displayed in COGO Traverse
Results. After storing the result and returning to COGO Traverse
Input, Input page, the point originally selected in <From:> is still
displayed. The next COGO calculation can be continued from that
same point.
5.
COGO Traverse Results, Result page
<Point ID:> The identifier for the COGO point depending on the point
ID template configured for <Survey Pts:> in CONFIGURE ID
Templates. The point ID can be changed.
GPS1200
Refer to
chapter
37.13
19.1
815