Configuring Reference Plane - Leica GPS1200 Series Technical Reference Manual

42.3
Description
Access step-by-step
REFPLANE
Configuration,
Parameters page
Reference Plane

Configuring Reference Plane

Allows options to be set which are used within the Reference Plane application program.
These settings are stored within the configuration set.
Step Description
1. Refer to "42.2 Accessing Reference Plane" to access REFPLANE Reference
Plane Begin.
2. CONF (F2) to access REFPLANE Configuration.
This screen consists of the Parameters page and the Logfile page.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
DMASK (F3)
To edit the display mask currently being
displayed. Accesses CONFIGURE Define
Display Mask n. Available when <Display
Mask:> is highlighted on Parameters page.
Refer to "19.2 Display Settings".
PAGE (F6)
To change to another page on this screen.
GPS1200 1095