Leica GPS1200 Series Technical Reference Manual page 779

COGO
COGO menu options
Intersections
Line Calculations
Description
• the azimuth/bearing and the distance from a
known point. Offset optional.
• the angle and the distance from a known point.
Offset optional.
Points with full coordinate triplets and position only
points can be used.
To calculate the position of an intersection point
using
• bearings from two known points.
• a bearing and a distance from two known points.
• distances from two known points.
• four points.
• two lines
Points with full coordinate triplets and position only
points can be used.
To calculate the base point of the line using
• two known points and an offset point.
• a bearing and a distance from a known point and
an offset point.
To calculate the offset point of the line using
GPS1200
Refer to
chapter
37.6
37.7
779