Leica GPS1200 Series Technical Reference Manual page 517

CONFIGURE
Message to Send
Config...\Interfaces... - General
Description of fields
Field Option
<Output:> At Epoch
Immediately
On Point Stored
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
Description
The NMEA message is created at the exact epoch as
defined in <Position and Screen Update:> in
CONFIGURE Display Settings. It is sent out in the
time interval as defined in <Rate:>. With <Output
Delay:>, the output can also be delayed by a time
after this epoch. Refer to paragraph "Diagram".
The NMEA message is created as soon as the infor-
mation is available. It is sent out in the time interval as
defined in <Rate:>. Refer to paragraph "Diagram".
The NMEA message is sent on point storage.
GPS1200 517