49.2
Access step-by-step
WAKE-UP
New Wake-Up Session,
General page
Wake-Up
Creating a New Wake-Up Session
Step
Description
1.
Refer to "49.1 Overview" to access WAKE-UP Wake-up Sessions.
2.
NEW (F2) to access WAKE-UP New Wake-Up Session.
A CompactFlash card must be fitted in the receiver for the wake-up session to take place. A
new wake-up session can still be created when there is no CompactFlash card fitted, though
there will be differences in the way the menu works:
•
<Job:> is an output field.
•
The options for <Pt Input:> are Manual and Pt ID Template.
.
STORE (F1)
To store the changes and to return to the
screen from where this screen was accessed.
TMPLT (F3)
Available for some options for <Pt Input:>. To
configure ID templates. Refer to "19.1 ID
Templates".
PAGE (F6)
To change to another page on this screen.
GPS1200
1315