Leica GPS1200 Series Technical Reference Manual page 884

COGO
Description of columns
Column Description
Source Pt The point ID of the points of origin for the calculation of the shifts and/or
rotation and/or scale.
Target Pt The point ID of the target points for the calculation of the shifts and/or rota-
tion and/or scale.
Match The type of match to be made between the points. This information is used
in the transformation calculation. Position & Height, Position only, Height
only or None.
None removes matched common points from the transformation calcula-
tion but does not delete them from the list. This can be used to help
improve residuals.
GPS1200
RESID (F6)
To display a list of the matched points used in
the transformation calculation and their associ-
ated residuals. Refer to paragraph "Fix param-
eters".
SHIFT PARAM (F5)
To define the parameters to be used in the 2D
transformation.
884