Leica GPS1200 Series Technical Reference Manual page 1271

Survey Cross Section
Description of fields
Field Option
<Point ID:> User input
SHIFT PREV (F3)
To select the previous element of the cross
section template. The currently measured
element will not be stored.
Available for STOP (F4) being displayed.
SHIFT NEXT (F4)
To select the next element of the cross section
template. The currently measured element will
not be stored.
Available for STOP (F4) being displayed.
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template and
the running point ID according to the ID
template. Refer to "19.1 ID Templates".
SHIFT QUIT (F6)
To exit Cross Section Survey application
program. An open template will be closed.
Description
The identifier for manually occupied points. The
configured point ID template is used. The ID can be
changed in the following ways:
• To start a new sequence of point ID's type over the
point ID.
GPS1200 1271