Show Vrrp Ipv6 - Dell S6100 Configuration Manual

vrid
all
bfd
database
packets
state
timer
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
8.3.19.0
8.3.10.0
8.4.1.0
8.3.2.0
Usage Information If you do not specify an option, debugging is active on all interfaces and all VRRP groups.

show vrrp ipv6

View the active IPv6 VRRP groups. If no VRRP groups are active, the Dell Networking OS returns No Active VRRP group.
Syntax show vrrp ipv6 [vrid] [interface] [brief] [vrf vrf-name]
Parameters
vrid
interface
• For a Port Channel interface, enter the keywords port-channel, and then a
number.
• For a VLAN interface, enter the keyword vlan, and then the VLAN ID. The VLAN ID
range is from 1 to 4094.
(OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
Enter the keyword all to enable debugging of all VRRP groups.
Enter the keyword bfd to enable debugging of all VFFP BFD interactions.
Enter the keyword database to display changes related to group, prefix, and interface
entries in the VRRP table.
Enter the keyword packets to enable debugging of VRRP control packets.
Enter the keyword state to enable debugging of VRRP state changes.
Enter the keyword timer to enable debugging of the VRRP timer.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on E-Series, C-Series, and S-Series. Support was added for IPv6 VRRP
groups in nondefault VRF instances.
Introduced on the E-Series.
(OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that
group. The range is from 1 to 255.
Enter the following keywords and the number information:
Virtual Router Redundancy Protocol (VRRP) 1727