Configure Dos-Protect Type L3-Protect Alert-Threshold - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure dos-protect type l3-protect alert-threshold

configure dos-protect type l3-protect alert-threshold <packets>

Configures the denial of service protection alert threshold.

Syntax Description

Specifies how many packets in an interval will cause an alert.

The default is 4000 packets.

Usage Guidelines

This command configures how many packets received in an interval will cause a DoS protection alert.

When an alert occurs, the packets are analyzed, and a temporary ACL is applied to the switch.

This example sets the alert threshold to 8000 packets:

configure dos-protect type l3-protect alert-threshold 8000

This command was first available in ExtremeWare XOS 11.1.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5