Table of Contents
Advertisement
M
V
C
S
ANAGING
IRTUAL
HASSIS
TACKS
You can also configure the ports on switches in the Orphan Summit list. This is done in
the same way as for switches in a VC stack. You may need to do this prior to adding an
Orphan switch to a Virtual Chassis stack.
To configure ports, follow these steps:
1 Select a VC stack or Orphan Summits in the Component Tree.
2 Click Config at the top of the Virtual Chassis Stack Manager page.
The Configure Ports in VC Stack dialog Box appears, as shown in Figure 9-9.
Figure 9-9: Configure ports in a VC Stack
3 Select a VC stack, or Orphan Switches, from the pull down list in the field at the top
of the dialog box.
Every Gigabit Ethernet port on every switch in the VC stack or the Orphan Summits
list is displayed, identified by Switch Name, IP Address, and Port Number.
9-14
E
W
E
M
XTREME
ARE
NTERPRISE
ANAGER
I
U
G
NSTALLATION AND
SER
UIDE
Advertisement
Table of Contents
