Trigger Source
Auto triggering is the recommended trigger source for each measurement, allowing the test set to choose the
preferred trigger source. However, the user may want to select the trigger source.
Table 1. Recommended Trigger Source Settings
Input Signal Type
Normal GSM TCH burst with
station
in active cell mode
Normal GSM TCH burst with
station
in test mode
Non-bursted signal including GMSK data
mobile station
with
in test mode
Related Topics
*******************************************************
"Programming an Output RF Spectrum Measurement" on page 78
"Test Adherence to Standards" on page 110
*******************************************************
Recommended Trigger Source
mobile
Protocol
mobile
RF Rise
RF Rise
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\meas_orfs_desc.fm
Output RF Spectrum Measurement Description
77