CALL:RFGenerator
CALL[:CELL]:RFGenerator:CHANnel:DCS
Function
Sets/queries the RF Gen Channel for the DCS band using the RF Generator.
Operating mode = Test Mode and Downlink Function = CW. See
Behavior" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization.
See
Setting
range: 512 to 885 (default 512)
resolution: 1
Query
range: 512 to 885
resolution: 1
*RST Setting
20 (PGSM band)
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:CHANNEL:DCS 512"
CALL[:CELL]:RFGenerator:CHANnel:EGSM
Function
Sets/queries the RF Gen Channel for the EGSM band using the RF Generator.
Operating mode = Test Mode and Downlink Function = CW. See
Behavior" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization.
See
Setting
range: 0 to 124 | 975 to 1023 (default: 20)
resolution: 1
Query
range: 0 to 124 | 975 to 1023
resolution: 1
*RST Setting
20 (PGSM band)
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:CHANNEL:EGSM 124"
278
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_rfgenerator.fm
531.
"Call Processing Subsystem Overlapped Commands" on page 33
531.
"Call Processing Subsystem Overlapped Commands" on page 33
"CW Test Function
for examples.
"CW Test Function
for examples.