FETCh:PFERror
FETCh:PFERror:FERRor:MINimum?
Function
Queries the minimum (from a multi-measurement) frequency error measurement result, in
Hz.
Range: −750 kHz to +750 kHz and 9.91 E+37 (NAN)
Query
Resolution: 0.1 kHz
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PFERror:ICOunt?
Function
Queries the intermediate count of phase and frequency multi-measurements completed. This
number will increase to the value returned by
Query
Range: 0 to 999
Resolution: 1
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PFERror:INTegrity?
Function
Queries the integrity indicator for the phase and frequency error measurement. Zero indicates a
normal result.
See
"Integrity Indicator" on page 125
Query
Range: 0 to 16
Resolution: 1
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PFERror:PEAK[:MAXimum]?
Function
Queries the maximum (from a multi-measurement) peak phase error result, in degrees.
Query
Range: 0 degrees to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
332
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_pferror.fm
"SETup:PFERror:COUNt:NUMBer" on page
for descriptions of non-zero integrity indicators.
423.