Agilent Technologies 8960 10 Series Reference Manual page 423

SETup:PFERror:COUNt:NUMBer
Function Sets/queries the number of phase/frequency measurements the Test Set will make when the
multi-measurement count state is on.
Setting Range: 1 to 999
Resolution: 1
Query Range: 1 to 999
Resolution: 1
*RST Setting 10
Programming Example
OUTPUT 714;"SETUP:PFERROR:COUNT:NUMBER 55" !Sets the multi-measurement count
SETup:PFERror:COUNt:STATe
Function Sets/queries the phase/frequency multi-measurement count state.
Setting Range: 0|OFF | 1|ON
Query 0|1
*RST Setting 0|off
Programming Example
OUTPUT 714;"SETUP:PFERROR:COUNT:STATE ON" !Turns on multi-measurement mode for
SETup:PFERror:TIMeout[:STIMe]
Function Sets/queries the phase/frequency measurement timeout value in seconds and sets the timeout
state to on. The units (S|MS) are optional, if no units are specified then unit default to S.
Setting Range: .1 to 999
Resolution: .1
Query Range: .1 to 999
Resolution: .1
*RST Setting 10 seconds
Programming Example
OUTPUT 714;"SETUP:PFERROR:TIMEOUT:STIME 3" !Sets the timeout state to on and the
!value to 55.
!the phase/frequency measurement.
!timeout value to 3 seconds.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_pferror.fm
SETup:PFERror
423