Agilent Technologies 8960 10 Series Reference Manual page 381

SETup:AAUDio:CONTinuous
Function Selects/queries the trigger arm state for Analog Audio measurements.
Setting Continuous trigger arm mode = 1|ON| Single trigger arm mode = 0|OFF
Query 0|1
*RST setting Single
Programming Example
10 OUTPUT 714;"AAUDIO:COUNTINUOUS OFF" !Selects single trigger mode.
SETup:AAUDio:COUNt[:SNUMber]
Function Selects the number of Analog Audio multi-measurements the Test Set will make and sets the
count state to ON.
Setting Range: 1 to 999 / Resolution: 1
*RST setting OFF
Programming Example
OUTPUT 714;"AAUDIO:COUNT :SNUMBER 5" !Sets the value to 5 and the state to on.
SETup:AAUDio:COUNt:NUMBer
Function Selects/queries the number of Analog Audio measurements the Test Set will make when the
"SETup:AAUDio:COUNt:STATe"
Setting Range: 1 to 999 / Resolution: 1
Query Range: 1 to 999 / Resolution: 1
*RST setting 10
Programming Example
OUTPUT 714;"ABORT:ALL" !Aborts all active measurements in progress.
OUTPUT 714;"SETUP:AAUDIO:COUNT:NUMBER 10" !Sets the audio multi-measurement
SETup:AAUDio:COUNt:STATe
Function Selects/queries the Analog Audio multi-measurement count state.
Setting 1|ON | 0|OFF
Query 1|0
*RST setting 0|OFF
Programming Example
OUTPUT 714;"SETUP:AAUDIO:COUNT:STATE ON" !Turns the analog audio measurement
is on.
!count number.
!multi-measurement count state on.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_aaudio.fm
SETup:AAUDio
381