Agilent Technologies 8960 10 Series Reference Manual page 281

CALL[:CELL]:RFGenerator:POWer:AMPLItude
Function Set/queries Rf Gen Power.
The suffix dBm is optional.
Operating mode = Test Mode and Downlink Function = CW. see
Behavior" on page
The RF Gen Power field is affected when there is an amplitude offset, see
Related Configuration" on page
Setting range: -10 to -100 dBm
resolution: .01 dBm
Query range: -10 to -100 dBm
resolution: .01 dBm
*RST Setting -85 dBm
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:POWER:AMPLITUDE -50DBM"
CALL[:CELL]:RFGenerator:POWer:STATe
Function Sets/queries the RF Gen Power State.
Operating mode = Test Mode and Downlink Function = CW. See
Behavior" on page
Setting range: 0 | OFF | 1 | ON
Query range: 0 | OFF | 1 | ON
*RST Setting ON
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:POWER:STATE OFF"
531.
563.
531.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_rfgenerator.fm
CALL:RFGenerator
"CW Test Function
"Measurement
"CW Test Function
281