Agilent Technologies 8960 10 Series Reference Manual page 519

Manual Receiver Control
If the receiver control parameter is set to manual, the test set's receiver frequency is set using the parameters
in the following table. See
details.
Table 1. Test Set Receiver Frequencies (Manual)
Operating Cell
Mode Activated
State
Active Cell ON or OFF
Test Mode ON or OFF
Auto Receiver Control
If the receiver control parameter is set to auto, the test set's receiver frequency is set using the parameters in
the following table. See
"CALL:TCHannel:BAND" on page 289
band details. See "CALL:BCHannel" on page 236
Table 2. Test Set Receiver Frequencies (Auto)
Operating Mode
Active Cell
Active Cell
Table 3. Test Set Receiver Frequencies (Auto)
Operating Mode
Test Mode
Test Mode
Test Mode
Table Footnotes
1 Actual frequency depends on current broadcast band (PGSM, EGSM, PCS, or DCS) and
is defined in GSM as the uplink frequency.
2 Actual frequency depends on current traffic channel band (PGSM, EGSM, PCS, or
DCS) and is defined in GSM as the uplink frequency.
"RFANalyzer:MANual:BAND" on page 375
Measurement Band
Manual Band
Manual Band
"CALL:TCHannel[:ARFCn][:SELected]" on page 287
for traffic band details. See
Cell Activated State Measurement Band
ON Traffic Band
OFF Cell Band
Test Function Measurement Band
BCH (1) Cell Band
BCH +TCH (2) Traffic Band
CW Cell Band
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\gen_bse_rcvr_test.fm
for manual band or manual frequency
Measurement Frequency
Manual Frequency
Manual Frequency
"CALL[:CELL]:BAND" on page 234
for broadcast channel details.
Measurement Frequency
Traffic Channel
Broadcast Channel
Measurement Frequency
Broadcast Channel
Traffic Channel
Broadcast Channel
Receiver Control
Measurement Channel
Manual Channel
Manual Channel
traffic channel details and
for cell
519