RFANalyzer:MANual:CHANnel:PCS
Function
Sets/queries the ARFCN that the mobile station is expected to transmit on. The test set will
tune to the corresponding uplink frequency for the PCS frequency band. see
Control" on page 518
The manual band must be set before manual channel will update. see
"RFANalyzer:MANual:BAND" on page 375
Setting
Range: 512 to 810
Resolution: 1
Query
Range: 512 to 810
Resolution: 1
*RST setting
Sets the receiver control to auto
Band: PGSM
Traffic Channel: 30
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:CHANNEL:PCS 512" !Sets ARFCN for PCS in manual
RFANalyzer:MANual:CHANnel:PGSM
Function
Sets/queries the ARFCN that the mobile station is expected to transmit on. The test set will
tune to the corresponding uplink frequency for the PGSM frequency band. see
Control" on page 518
The manual band must be set before manual channel will update. see
"RFANalyzer:MANual:BAND" on page 375
Setting
Range: 1 to 124
Resolution: 1
Query
Range: 1 to 124
Resolution: 1
*RST setting
Sets the receiver control to auto
Band: PGSM
Traffic Channel: 30
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:CHANNEL:PGSM 124" !Sets ARFCN for PGSM in manual
!receiver mode.
!receiver mode.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_rfanalyzer.fm
RFANalyzer
"Receiver
"Receiver
377