Agilent Technologies 8960 10 Series Reference Manual page 413

SETup :ORFSpectrum
"Diagram Conventions" on page 213
SETup:ORFSpecturm:CONTinuous
Function Selects/queries the trigger state for output RF spectrum measurements.
Range Continuous trigger mode: 1|ON
Single trigger mode: 0|OFF
Query Setting 1|0
*RST 1|on
Programming Example
OUTPUT 714;"ABORT:ALL" !Aborts all active measurements in progress.
OUTPUT 714;"SETUP:CONTINUOUS OFF" !Sets trigger mode to single for an
SETup:ORFSpectrum:COUNt:STATe
Function Selects/queries output RF spectrum due to switching and modulation multi-measurement count
state.
Setting 0|OFF|1|ON
Query Setting 0|1
*RST 1|on
Programming Example
OUTPUT 714;"SETUP:ORFSPECTRUM:COUNT:STATE ON" !Sets count state for both ORFS
:TIMeout
[:STIMe]
:TIME
:STATe
:TRIGger
:DELay
:SOURce
!ORFS measurement.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_orfspectrum.fm
<sp><num value>[S|MS]
?
Complex Command
<sp><num value>[S|MS]
?
<sp>1|ON|0|OFF
? (returns 1|0)
<sp><num value>[S|MS|US|NS]
?
<sp>AUTO|IMMediate|PROTocol|RISE
?
!due to switching and
!modulation measurements.
SETup:ORFSpectrum
413