Agilent Technologies 8960 10 Series Reference Manual page 492

SYSTem:MEASurement
SYSTem
:MEASurement
"Diagram Conventions" on page 213
SYSTem:MEASurement:RESet
Function Sets all measurements to abort, if the trigger arm is set to continuous the measurements will
begin a new measurement cycle. See
151
Any measurement results are cleared and the Integrity Indicator is set to 1
(No_Result_Available). See
Setting These results are set to their default values:
• RACH Count
• Page Count
• Missing Burst Count
• Corrupted Burst Count
• Channel Decoder Error Count
• MS TX Level Reported
• TCH Timing Advance Reported
• RX Level
• RX Qual
Programming Example
OUTPUT 714;"SYSTEM:MEASUREMENT:RESET" !Resets current measurements.
:RESet
"Trigger Arm (Single or Continuous) Description" on page
"Integrity Indicator" on page 125
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_SYSTem_MEASurement.fm
SYSTem:MEASurement
492