FETCh:BERRor:FULL?
Function
Queries the bit error measurement.
Returns Integrity Indicator see
and Bit Error Count for Type Ia, Type Ib and Type II bits. (A similar query,
"FETCh:BERRor[:ALL]?" on page
previously set using the SETup:BERRor[:TYPE] command.) See
Description" on page 48
Query
Integrity indicator
• Range: 0 to 16
• Resolution: 1
Type Ia Bits tested
• Range: 0 to 999,000 and 9.91E+37 (NAN)
• Resolution: 1
Type Ia Bit error ratio
• Range: 0 to 100 and 9.91E+37 (NAN)
• Resolution: 0.01
Type Ia Bit error count
• Range: 0 to 999,000 and 9.91E+37 (NAN)
• Resolution: 1
Type Ib Bits tested
• Range: 0 to 2,637,369 and 9.91E+37 (NAN)
• Resolution: 1
Type Ib Bit error ratio
• Range: 0 to 100 and 9.91E+37 (NAN)
• Resolution: 0.01
Type Ib Bit error count
• Range: 0 to 2,637,369 and 9.91E+37 (NAN)
• Resolution: 1
Type II Bits tested
• Range: 0 to 15,584,400 and 9.91E+37 (NAN)
• Resolution: 1
Type II Bit error ratio
• Range: 0 to 100 and 9.91E+37 (NAN)
• Resolution: 0.01
Type II Bit error count
• Range: 0 to 1,558,440 and 9.91E+37 (NAN)
• Resolution: 1
"Integrity Indicator" on page
302, returns the same results but only for the bit type
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_berror.fm
125, Bits Tested, Bit Error Ratio
"Bit Error Measurement
FETCh:BERRor
305