Agilent Technologies 8960 10 Series Reference Manual page 580

Fixed Timer Messages
Timer Name
T3113 Paging timer
T3212 Location update timer
T3250 TMSI reallocation timer
T3260 Authentication response timer
XXXXXXXXXXXXXXXX
580
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_fixed_timer.fm
Description
Time the network waits after transmitting
the PAGING REQUEST message until
receiving the PAGING RESPONSE
message. This occurs before re-transmitting
the PAGING REQUEST (if the maximum
number of re-transmissions have not been
exceeded).
The location update timer is set to zero,
periodic location update by the MS are
disabled. If the MS camps to the BCH and
decodes a new MCC or MNC from the one it
last camped on, it should perform a location
update.
Time the network waits after sending the
TMSI REALLOCATION COMMAND until
receiving TMSI REALLOCATION
COMPLETE. This occurs before aborting
the procedure and releasing the Radio
Resource connection.
Time the network waits after an
AUTHENTICATION REQUEST until
receiving AUTHENTICATION RESPONSE.
This occurs before aborting the procedure
and releasing the Radio Resource
connection.
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXX
Value
5 seconds
zero = infinite time
5 seconds
5 seconds
XXXXXXXXX