Agilent Technologies 8960 10 Series Reference Manual page 370

RFANalyzer Subsystem
RFANalyzer Subsystem
July 1, 1999
Description
The RFANalyzer command subsystem performs "lower-level" functions that control the Test Set's measuring
receiver. Most of these functions are normally controlled indirectly by commands in other subsystems. One
exception would be when operating in Test Mode. For example, the command CALL:TCHannel:<channel
number> would set the RFANalyzer:EXPected:FREQuency parameter to the frequency that maps to the
uplink traffic channel specified.
Syntax Diagrams and Command Descriptions
"RFANalyzer" on page 371
370
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_rfanalyzer_description.fm