Agilent Technologies 8960 10 Series Reference Manual page 327

FETCh:ORFSpectrum:SWITChing:FREQuency[:OFFSet][:MAXimum]?
Function Queries the ORFS due to switching measurement, allowing frequency offset values to be
appended to the command. Returns ORFS due to switching (maximum) measurements at the
frequencies listed, in the order they are listed.
Frequencies must have a one-to-one correspondence to ORFS due to switching frequency offsets
that are currently turned on. Frequencies must be separated by commas. (See
"SETup:ORFSpectrum:SWITching:FREQuency[:OFFSet]"
frequency offsets.)
Each value is (optionally) followed by: HZ|KHZ|MHZ|GHZ . The default units are HZ (hertz).
Range: −100 dB to +100 dB and 9.91 E+37
Query
Resolution: 0.01 dB
Programming Example
OUTPUT 714;"FETCH:ORFSPECTRUM:SWITCHING:FREQUENCY:OFFSET:MAXIMUM? 200 KHZ,
400 KHZ" !Returns the ORFS due to switching (maximum) measurement results
!at the 200 kHz and 400 kHz offsets only, assuming these offsets are
!turned on
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:ORFSpectrum:SWITChing:FREQuency[:OFFSet]:AVERage?
Function Queries the ORFS due to switching measurement, allowing frequency offset values to be
appended to the command. Returns ORFS due to switching (average) measurements at the
frequencies listed, in the order they are listed.
Frequencies must have a one-to-one correspondence to ORFS due to switching frequency offsets
that are currently turned on. Frequencies must be separated by commas. (See
"SETup:ORFSpectrum:SWITching:FREQuency[:OFFSet]"
frequency offsets.)
Each value is (optionally) followed by: HZ|KHZ|MHZ|GHZ . The default units are HZ (hertz).
Range: −100 dB to +100 dB and 9.91 E+37
Query
Resolution: 0.01 dB
Programming Example
OUTPUT 714;"FETCH:ORFSPECTRUM:SWITCHING:FREQUENCY:OFFSET:AVERAGE? 200 KHZ,
400 KHZ" !Returns the ORFS due to switching (average) measurement results at the
!200 kHz and 400 kHz offsets only, assuming these offsets are turned on.
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_orfspectrum.fm
for the command that turns on
for the command that turns on
FETCh:ORFSpectrum
327