Agilent Technologies 8960 10 Series Reference Manual page 498

IEEE 488.2 Common Commands
*SRE
The *SRE, service request enable command, is defined in "IEEE Std 488.2-1992", 10.34. The parameter range
for this command is 0 through 255.
*SRE?
The *SRE?, service request enable query, is defined in "IEEE Std 488.2-1992", 10.35. Values returned by this
query range from 0 through 255.
*STB?
The *STB?, read status byte query, is defined in "IEEE Std 488.2-1992", 10.36. Values returned by this query
range from 0 through 255.
*WAI
The *WAI, wait-to-continue command, is defined in "IEEE Std 488.2-1992", 10.39. The *WAI command
prevents the test set from executing any further commands or queries until all pending operation flags are
false. The *WAI common command is not recommended for use as an overlapped command.
Related Topics
*******************************************************
"Call Processing Event Synchronization" on page 30
"Preset Descriptions" on page 535
"Obtaining Identification Information *IDN?" on page 558
*******************************************************
498
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_COMMON.fm