Agilent Technologies 8960 10 Series Reference Manual page 364

READ
READ:DAUDio[:ALL]?
Function Queries (initiates and fetches) one decoded audio (uplink speech level) measurement as a
sequential operation.
Returns Integrity Indicator see
The FETCh command should be used to obtain other measurement results. See
"FETCh:DAUDio" on page
Query Integrity indicator
• Range: 0 to 16
• Resolution: 1
Decoded audio (average)
• Range: 0 to 100% FS (full scale)
• Resolution: 0.01% FS
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
READ:DPOWer[:ALL]?
Function Queries the Dynamic Power measurement results. Query returns N integrity indicators and N
average TX power levels (where N is the number of bursts measured). To set the number of
bursts you want to measure, use
Query Integrity indicators for each individual burst
• Range: 0 to 16
• Resolution: 1
Average TX power levels for each individual burst
• Range: -100 to +100 dBm and 9.91 E+37 (NAN)
• Resolution: 0.01 dBm
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
READ:FBERror[:ALL]?
Function Queries (initiates and fetches) one fast bit error measurement as a sequential operation.
Returns Integrity Indicator see
and Fast Bit Error Count using mobile station burst-by-burst looback (type C loopback). The
FETCh command should be used to obtain other measurement results. See
page
364
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_read.fm
308.
314.
"Integrity Indicator" on page 125
"SETup:DPOWer:COUNt:NUMBer" on page
"Integrity Indicator" on page
and decoded audio (average).
404.
125, Bits Tested, Bit Error Ratio,
"FETCh:FBERror" on