Returned Values; Related Topics - Agilent Technologies 8960 10 Series Reference Manual

Programming a Bit Error Measurement

Returned values

The measurements returned by this program are:
• Integrity Indicator returns the "Integrity Indicator" on page 125 (0 means a successful measurement with
no errors).
• Bits_tested returns the number of bits tested.
• Bit_err_ratio returns the ratio of bit errors to total bits tested.
• Bit_err_count returns the number of bit errors.
• Crc_count returns the CRC count (cyclic redundancy check).

Related Topics

*******************************************************
"Bit Error Measurement Description" on page 48
"SETup:BERRor" on page 385
"INITiate" on page 355
"FETCh:BERRor" on page 300
"Comprehensive Program Example" on page 200
"BERR Troubleshooting" on page 54
*******************************************************
53
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_berr_proc.fm