Agilent Technologies 8960 10 Series Reference Manual page 442

STATus:OPERation
STATus:OPERation Condition Register Bit Assignment
The OPERation status register set contains bits which give an indication of conditions that are part of the test
set's normal operation.
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
442
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_status_operation.fm
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
Processing
SYSTem:SYNChronized
Command
Reserved for future use
CALL Summary
NMRReady (New Measurement
Result Ready) Summary
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Extension Bit
Description
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This condition bit will be "pulsed" by the
SYSTem:SYNChronized command. This will allow
the status system to indicate that the input buffer is
synchronized to the point where this command is
parsed and that all prior sequential commands are
completed and all prior overlapped commands have
started.
This bit will always be 0.
This bit is the summary bit for the
OPERation:CALL register.
This bit is the summary bit for the
OPERation:NMRReady register.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.