Agilent Technologies 8960 10 Series Reference Manual page 579

Timer Name
T313 Connect acknowledge timer
T323 Modify complete timer
T3101 Immediate assignment timer
T3103 Handover timer
T3105 Physical information repetition timer
T3107 Channel assignment timer
T3109 Signalling disconnection timer
T3111 Channel deactivation after
disconnection timer
Description
Time the network waits after transmitting a
CONNECT message until receiving the
CONNECT ACKNOWLEDGE message
before performing clearing procedures with
the MS.
Time the network waits after sending a
MODIFY message during call mode
changes, until receiving a MODIFY
COMPLETE or MODIFY REJECT message
before initiating call clearing procedures.
Time the network waits after sending the
IMMEDIATE ASSIGNMENT or
IMMEDIATE ASSIGNMENT EXTENDED
message until the main signalling link is
established before releasing the newly
allocated channels.
Time the network waits after transmitting a
HANDOVER COMMAND message until
receiving HANDOVER COMPLETE or
HANDOVER FAILURE or the MS
re-establishes the call before the old
channels are released. If the timer expires
and the network has not received a correctly
decoded L2 (format A or B) or TCH frame,
then the newly allocated channels are
released.
Time the network waits after sending the
PHYSICAL INFORMATION message until
receiving a correctly decoded L2 (format A
or B) or TCH frame. This occur before
re-transmitting the PHYSICAL
INFORMATION message or releasing the
newly allocated channels.
Time the network waits after transmitting
an ASSIGNMENT COMMAND message
until receiving the ASSESSMENT
FAILURE message or the MS re-establishes
the call before releasing the old and the new
channels.
Time the network waits after sending the
CHANNEL RELEASE message before
disconnecting the signalling link.
Time the network waits after disconnecting
the signalling link before deactivating the
channel.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_fixed_timer.fm
Fixed Timer Messages
Value
10 seconds
10 seconds
1 second
2 seconds
50 ms
3 seconds
5 seconds
500 ms
579