Agilent Technologies 8960 10 Series Reference Manual page 279

CALL[:CELL]:RFGenerator:CHANnel:PCS
Function Sets/queries the RF Gen Channel for the PCS band using the RF Generator.
Operating mode = Test Mode and Downlink Function = CW. See
Behavior" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization.
See
Setting range: 512 to 810 (default: 512)
resolution: 1
Query range: 512 to 810
resolution: 1
*RST Setting 20 (PGSM band)
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:CHANNEL:PCS 512"
CALL[:CELL]:RFGenerator:CHANnel:PGSM
Function Sets/queries the RF Gen Channel for the PGSM band using the RF Generator.
Operating mode = Test Mode and Downlink Function = CW. See
Behavior" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization.
See
Setting range: 1 to 124 (default: 20)
resolution: 1
Query range: 1 to 124
resolution: 1
*RST Setting 20 (PGSM band)
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:CHANNEL:PGSM 124"
531.
"Call Processing Subsystem Overlapped Commands" on page 33
531.
"Call Processing Subsystem Overlapped Commands" on page 33
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_rfgenerator.fm
CALL:RFGenerator
"CW Test Function
for examples.
"CW Test Function
for examples.
279