Agilent Technologies 8960 10 Series Reference Manual page 358

INITiate
INITiate:DONE:FLAG<measurement mnemonic>
Function Specifies which measurements are considered, (included or excluded) when the DONE? query is
sent.
If a measurements trigger arm, see
151, has been left in continuous mode, the done flag for that measurement will toggle between
DONE and WAIT, see
not be able to catch the measurement at the instant it is done, therefore the measurement will
never appear to be done. If a measurement trigger arm must be left in continuous mode the user
should (exclude) it, using this command, from the INITiate:DONE? query results.
Once the INITiate:DONE:FLAG has been set to EXCLude for a measurement, the user must
send the INCLude command for that measurement in order to query that measurement with, the
INITiate:DONE? query. The test set will not reset any (excluded measurement) to be an (included
measurement) with any form of preset, see
Setting Range
• INCLude
• EXCLude
Related Topics "INITiate:DONE?"
Programming Example
OUTPUT 714;"INITIATE:DONE:FLAG:AAUDIO EXCLUDE" !excludes AAUDIO measurements
INITiate:ON?
Function Queries the names of the measurements (none, one, or more than one) that are ON in a comma
separated list of measurement mnemonics. See
page
Query Range: AAUD | BERR | DAUD | DPOW | FBER | IQT | ORFS | PFER | PVT | TXP | NONE
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
358
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_initiate.fm
"INITiate:DONE?" on page
:AAUDio| :BERRor | :DAUDio | :DPOWer | :FBERror | :IQTuning | :ORFSpectrum |
:PFERror | :PVTime |:TXPower
:AAUDio| :BERRor | :DAUDio | :DPOWer | :FBERror | :IQTuning | :ORFSpectrum |
:PFERror | :PVTime |:TXPower
.
356.
"Trigger Arm (Single or Continuous) Description" on page
132. The INITiate:DONE? query will probably
"Preset Descriptions" on page
!from contributing the
!INIATIATE:DONE? query.
"INITiate:<measurement mnemonic>[:ON]" on
535.