Agilent Technologies 8960 10 Series Reference Manual page 581

Manual User Error Messages
Description
These messages are only intended to be displayed on the manual user interface only, they are not entered into
the Error/Event Queue.
Error Message
MUI1 The function you requested is not yet available.
MUI2 IQ Calibration completed successfully for modulator
<N>. Cycle power to continue.
MUI3 IQ Calibration failed for modulator <N>. Cycle power
to continue.
MUI4 The function you requested is not available in this
radio personality.
MUI5 IQ Calibration for modulator <N> in progress. Call
processing disabled
MUI6 Instrument warning: Audio generator instrument has
been closed.
MUI7 Instrument warning: Audio Analyzer instrument has
been closed.
MUI8 Measurement warning: Analog audio measurement
has been closed.
XXXXXXXXXXXXXXXXXXXXX
Description
The test set does not have this capability.
<N> is the IQ modulator number that the user is
attempting to calibrate, <N> is 1 or 2.
<N> is the IQ modulator number that the user is
attempting to calibrate, <N> is 1 or 2.
This function is used in another radio personality.
<N> is the IQ modulator number that the user is
attempting to calibrate, <N> is 1 or 2.
The audio generator instrument was closed
automatically by the test set.
The audio analyzer instrument was closed
automatically by the test set.
Analog audio measurements have been closed by
the test set.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXX
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_mui.fm
Manual User Error Messages
581