Agilent Technologies 8960 10 Series Reference Manual page 260

CALL:MS
CALL:MS:REPorted:RXQuality[:LAST]?
Function The MS reported quality of the signal used for the RX Level during the last SACCH report.
Query range: 0 to 7 and 9.91E+37
resolution: 1
*RST Setting 9.91E+37 (NAN)
Programming Example
OUTPUT 714;"CALL:MS:REPORTED:RXQUALITY:LAST?"
CALL:MS:REPorted:RXQuality:NEW?;NEW?;NEW?
Function Queries the MS reported received quality from the SACCH report. Each time the :NEW? query is
sent the test set hangs until report results from that measurement period are sent.
A hanging query that will not return until the MS reports a new SACCH message to test set.
This will return 3 variables the first two must be ignored, the value from the third new query is
valid data.
Query range: 0 to 7 and 9.91E+37
resolution: 1
*RST Setting 9.91E+37 (NAN)
Programming Example
OUTPUT 714;"CALL:MS:REPORTED:RXQUALITY:NEW?;NEW?;NEW?" ! The third result is valid.
CALL:MS:REPorted:SBANd?
Function Query for the frequency band supported by the MS.
Query range: PGSM | EGSM | DCS | PCS | ""
*RST Setting "" (null string)
Programming Example
OUTPUT 714;"CALL:MS:REPORTED:SBAND?"
260
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_ms.fm