FETCh:PVTime
FETCh:PVTime:TXPower[:AVERage]?
Function
Queries power versus time carrier power (average).
Range: −100 dBm to 100 dBm and 9.91 E+37 (NAN)
Query
Resolution: 0.01 dB
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:TXPower:SDEViation?
Function
Queries power versus time carrier power (standard deviation).
Query
Range: 0 dB to 100 dB and 9.91 E+37 (9.91 E+37 (NAN))
Resolution: 0.001 dB
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:MASK:ALL?
Function
Queries the power versus time measurement mask pass/fail indicator and the following worst
case margins:
• Upper limit margin time
• Upper limit margin result
• Lower limit margin time
• Lower limit margin result
Margin time is the point in time, relative to burst bit 0, that corresponds with the worst case
measurement result (the measurement with the least difference between measured power and
the power level boundary specified by the power versus time mask). See the
Measurement" on page
Margin result is the difference between the measured power and the power level boundary
specified by the power versus time mask. See the
340
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_pvtime.fm
91.
"Typical GSM PvT Measurement" on page
"Typical GSM PvT
91.