SYSTem:CORRection
SYSTem:CORRection:GAIN
Function
Sets/queries the amplitude offset value in DB, used to correct for RF path loss when the
correction state is on. See
The units DB are optional, if no units are specified then units default to DB.
Range: −100 to +100
Setting
Resolution: .1
Range: −100 to +100
Query
Resolution: .1
*RST Setting
0 dB
Programming Example
OUTPUT 714;"SYSTEM:CORRECTION:GAIN 6" !Sets an amplitude offset of 6 dB.
SYSTem:CORRection:STATe
Function
Sets/queries the amplitude offset state. See
Setting
0|OFF | 1|ON
Query
0|1
*RST Setting
0|off
Programming Example
OUTPUT 714;"SYSTEM:CORRECTION:STATE ON" !Sets amplitude offset state on.
486
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_SYSTem_correction.fm
"Measurement Related Configuration" on page 563
"Measurement Related Configuration" on page 563