Agilent Technologies 8960 10 Series Reference Manual page 588

-200 to -299 Execution Errors
Error Message
-240 Hardware error
-241 Hardware missing
-250 Mass storage error
-251 Missing mass storage
-252 Missing media
-253 Corrupt media
-254 Media full
-255 Directory full
-256 File name not found
-257 File name error
-258 Media protected
-270 Macro error
-271 Macro syntax error
-272 Macro execution error
588
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_neg200.fm
Description
Indicates that a legal program command or query could
not be executed because of a hardware problem in the
device.
Indicates that a legal program command or query could
not be executed because of missing device hardware.
For example, an option was not installed.
Indicates that a mass storage error occurred. The
device cannot detect the more specific errors described
for errors -251 through -259.
Indicates that a legal program command or query could
not be executed because of missing mass storage.
Indicates that a legal program command or query could
not be executed because of missing media. For
example, no disk.
Indicates that a legal program command or query could
not be executed because of corrupt media. For example,
bad disk or wrong format.
Indicates that a legal program command or query could
not be executed because the media is full. For example,
there is no room left on the disk.
Indicates that a legal program command or query could
not be executed because the media directory was full.
Indicates that a legal program command or query could
not be executed because the file name was not found on
the media.
Indicates that a legal program command or query could
not be executed because the file name on the device
media was in error. For example, an attempt was made
to read or copy a nonexistent file.
Indicates that a legal program command or query could
not be executed because the media was protected. For
example, the write-protect switch on a memory card
was set.
Indicates that a macro related execution error
occurred.
Indicates that a syntactically legal macro program
data sequence, according to IEEE 488.2, 10.7.2, could
not be executed due to a syntax error within the macro
definition.
Indicates that a syntactically legal macro program
data sequence could not be executed due to some error
in the macro definition, see IEEE 488.2, 10.7.6.3.