SYSTem:CORRection
SYSTem
:CORRection
"Diagram Conventions" on page 213
SYSTem:CORRection[:SGAin]
Function
Sets/queries the amplitude offset value in dB, used to correct for RF path loss and also turns the
STATe ON. See
The units, dB, are optional, if no units are specified then units default to dB.
Range: −100 to +100
Setting
Resolution: .1
Range: −100 to +100
Query
Resolution: 0.1
*RST Setting
0 dB
Programming Example
OUTPUT 714;"SYSTEM:CORRECTION:SGAIN 6" !Sets an amplitude offset of 6 dB.
[:SGAin]
Complex Command
:GAIN
:STATe
"Measurement Related Configuration" on page
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_SYSTem_correction.fm
<sp><num value>[DB]
?
<sp><num value>[DB]
?
<sp>1|ON|0|OFF
?
(returns 1|0)
563.
SYSTem:CORRection
485