Agilent Technologies 8960 10 Series Reference Manual page 269

CALL:PAGing:REPeat[:STATe]
Function Sets/queries repeat paging state. When the state is ON paging repeats until the test set receives a
RACH. When the state is off the test set returns the No response to page timer T3113 expiry. See
"Fixed Timer Messages" on page
Setting 0 | OFF | 1 | ON
Query 0 | 1
*RST Setting 0|OFF
Programming Example
OUTPUT 714;"CALL:PAGING:REPEAT:STATE ON" !Turns paging repeat ON.
CALL:PAGing:MODE
Function Sets/queries the paging mode that the test set will use to page the MS. Some mobile stations can
be set to a discontinuous reception mode (DRX), which configures the MS to look for a page in a
pre-defined paging subchannel only.
When paging mode is set to Reorg (DRX off), the test set will page the MS on the paging channel
in the next available paging channel without waiting for the defined paging group.
When paging mode is set to Normal (DRX on), the test set will page the MS on the correct paging
subchannel defined by the mobile station's paging group.
Setting range: REORg | NORMal
Query range: REOR | NORM
*RST Setting Reorg
Programming Example
OUTPUT 714;"CALL:PAGING:MODE REOR" ! MS will be sent a page on the
578.
! next available paging subchannel
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_paging.fm
CALL:PAGing
269