CALL:PMNCode
CALL[:CELL]:PMNCode:VALue
Function
Sets/queries the 3 digit mobile network code value. This command is used for PCS band only.
See
Setting
range: 0 to 999
resolution: 1
Query
range: 0 to 999
resolution: 1
*RST Setting
1
Programming Example
OUTPUT 714;"CALL:CELL:PMNCODE 798" !Sets the 3 digit MNCode for PCS 1900 to 798.
CALL[:CELL]:PMNCode:STATe
Function
Sets/queries the MNC state. This command is used for the PCS band only. See
for PCS" on page
Setting
range: 0 | OFF | 1 | ON
Query
range: 0 | OFF | 1 | ON
*RST Setting
OFF
Programming Example
OUTPUT 714;"CALL:CELL:PMNCODE:STATE ON"
272
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_PMNCode.fm
"3 Digit MNC for PCS" on page
513.
513.
"3 Digit MNC