Agilent Technologies 8960 10 Series Reference Manual page 594

+100 to +199 Core Device-Specific Error
Error Message
+113 Internal error; <VI NAME> forced inactive
+114 Internal error; <VI NAME> not responding
+120 Warning; Receiver overrange due to present setting
of amplitude offset (SYST:CORR:GAIN)
+121 Warning; Receiver underrange due to present
setting of amplitude offset (SYST:CORR:GAIN)
+122 Warning; Reference out of lock
+123 Warning; Duplicate RF IN/OUT Amplitude Offset
Frequency entry. First frequency entry in RF IN/OUT
Amplitude Offset table will be used.
+130 Configuration error; Unable to switch to indicated
Test Application
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
594
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_pos100.fm
Description
Indicates that a VI is inactivated when not executed.
<VI NAME> could be : "IntVmVI", "GSMFixedVI",
"MiscVI", or "GSMSacchMriVI"
Indicates that a VI has not been instantiated or the
state is not available.
Indicates the combination of Expected Power and
Amplitude Offset are out of range for the test set.
Indicates the combination of Expected Power and
Amplitude Offset are out of range for the output level
of the MS.
Indicates the test set's internal reference is out of lock.
Indicates that an amplitude offset value for that
frequency has already been entered. The test set will
use the amplitude offset value entered first.
The test application selected is not available for this
test set.
XXXXXXXXXXXXXXXXXXXXXXXXXX