Call:activated - Agilent Technologies 8960 10 Series Reference Manual

CALL:ACTivated

April 20, 1999
CALL
[:CELL[1]]
"Diagram Conventions" on page 213
CALL[:CELL]:ACTivated[:STATe]
Function Turns BS Emulator control of all signalling operations, uplink demodulation and downlink (BCH
& TCH) generation on or off. Query form returns a 1 (state = on) or a 0 (state = off).
When the test set's operating mode is "test mode" or when the cell activated state is "off", the
burst type may need to be specified before the test set can synchronize to the input signal's
midamble. See
Setting range: 1 | ON | 0 | OFF
Query range: 1 | 0
*RST Setting 1 (state = ON)
Related Topics "Configuring the Broadcast Channel (BCH)" on page 511
Programming Example
OUTPUT 714;"CALL:CELL:ACTIVATED:STATE OFF" !Turns all signalling operations,
:ACTivated
"Expected Burst" on page
!uplink demodulation and downlink
!(BCH & TCH) generation off.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_activated.fm
[:STATe]
526.
CALL:ACTivated
<sp>1|ON|0|OFF
? (returns 1|0)
227