Agilent Technologies 8960 10 Series Reference Manual page 323

FETCh:ORFSpectrum[:ALL]?
Function Queries integrity indicator, TX carrier power, up to eight comma-separated output RF spectrum
due to switching (max) results, 30 kHz bandwidth power, and up to 22 output RF spectrum due to
modulation (average) results.
The "SETup:ORFSpectrum:SWITching:FREQuency[:OFFSet]"
output RF spectrum due to switching offsets that are turned on and their frequency values. The
"SETup:ORFSpectrum:SWITching:FREQuency:POINts?"
spectrum due to switching points that are turned on, indicating the number of output RF
spectrum due to switching (max) values to expect when you FETCh results.
The "SETup:ORFSpectrum:MODulation:FREQuency[:OFFSet]"
output RF spectrum due to modulation offsets that are turned on and their frequency values. The
"SETup:ORFSpectrum:MODulation:FREQuency:POINts?"
output RF spectrum due to modulation points that are turned on, indicating the number of
output RF spectrum due to modulation (average) values to expect when you FETCh results.
Query Integrity indicator
• Range: 0 to 16
• Resolution: 1
TX Carrier Power
• Range: −100 dBm to +100 dBm and 9.91 E+37
• Resolution: 0.01 dB
Output RF Spectrum Due to Switching (Max)
• Range: −100 dBm to +100 dBm and 9.91 E+37
• Resolution: 0.01 dB
30 kHz Bandwidth Power
• Range: −100 dBm to +100 dBm and 9.91 E+37
• Resolution: 0.01 dB
Output RF Spectrum due to Modulation (Average)
• Range: −200 dB to +100 dB and 9.91 E+37
• Resolution: 0.01 dB
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_orfspectrum.fm
command sets up the number of
queries the number of output RF
command sets up the number of
command queries the number of
FETCh:ORFSpectrum
323