Agilent Technologies 8960 10 Series Reference Manual page 348

FETCh:PVTime
FETCh:PVTime:POWer:TIME[:OFFSet]:SDEViation?
Function Queries the standard deviation, from a number of multi-measurements, at each user-settable
time offset appended to this command. Specified time values must correspond to user-settable
time offsets that are currently turned on, and must be rounded to the same values. (9.91 E+37
(NAN) will be returned for specified offsets that do not correspond to offsets currently turned on).
Power levels are relative to the power versus time carrier power measurement.
The "SETup:PVTime:TIME[:OFFSet]"
and their time values. Measurements will be returned by this query in the same order they are
listed in the command.
Query Power levels:
• Range: 0 dBc to +100 dBc and 9.91 E+37 (NAN)
• Resolution: 0.001 dB
Time offsets:
• Range: Up to 12 time offset values, corresponding to entries in the Power vs Time table of
user-defined time offsets currently turned on. The default units are s (seconds).
• Resolution: Rounded to the same value as displayed in the Power vs Time table and returned
by the
Programming Example
OUTPUT 714;"FETCH:PVTIME:POWER:TIME:OFFSET:SDEVIATION? 0 US, 570.8 US"
!Returns the standard deviation of power versus time measurements
at the 0.0 ms and 570.8 ms offsets.
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:ICOunt?
Function Queries the intermediate count of power versus time multi-measurements completed.
Query Range: 0 to 999
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:INTegrity?
Function Queries the integrity indicator for the power versus time measurement. Zero indicates a normal
result.
See "Integrity Indicator" on page 125
Query Range: 0 to 16
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
348
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_pvtime.fm
"SETup:PVTime:TIME[:OFFSet]"
command sets up the number of offsets that are turned on
query.
for descriptions of non-zero integrity indicators.