Rach Troubleshooting; Possible Setup Issues; Interpreting Integrity Indicator Values - Agilent Technologies 8960 10 Series Reference Manual

RACH Troubleshooting

February 14, 2000

Possible Setup Issues

During manual or remote operation of a RACH measurement ensure that the multi-measurement count is set
to Off. The measurement would not complete if multi-measurement count was set to On.
If required refer to the appropriate command:
• "SETup:PVTime:COUNt:STATe" on page 428
• "SETup:TXPower:COUNt:STATe" on page 434
• "SETup:PFERror:COUNt:STATe" on page 423

Interpreting Integrity Indicator values

See "Integrity Indicator" on page 125.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_rach.fm
RACH Troubleshooting
102