READ
READ:BERRor:FULL?
Function
Queries (initiates and fetches) one RX bit error measurement as a sequential operation.
Returns Integrity Indicator, see
and Bit Error Count for Type Ia, Type Ib and Type II. (A similar query,
on page
SETup:BERRor[:TYPE] command.) The FETCh command should be used to obtain other
measurement results. See
Query
Integrity indicator
• Range: 0 to 16
• Resolution: 1
Type Ia Bits tested
• Range: 0 to 999000 and 9.91E+37 (NAN)
• Resolution: 1
Type Ia Bit error ratio
• Range: 0 to 100 and 9.91E+37 (NAN)
• Resolution: 0.01
Type Ia Bit error count
• Range: 0 to 999000 and 9.91E+37 (NAN)
• Resolution: 1
Type Ib Bits tested
• Range: 0 to 2637369 and 9.91E+37 (NAN)
• Resolution: 1
Type Ib Bit error ratio
• Range: 0 to 100 and 9.91E+37 (NAN)
• Resolution: 0.01
Type Ib Bit error count
• Range: 0 to 2637369 and 9.91E+37 (NAN)
• Resolution: 1
Type II Bits tested
• Range: 0 to 15584400 and 9.91E+37 (NAN)
• Resolution: 1
Type II Bit error ratio
• Range: 0 to 100 and 9.91E+37 (NAN)
• Resolution: 0.01
Type II Bit error count
• Range: 0 to 1558440 and 9.91E+37 (NAN)
• Resolution: 1
362
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_read.fm
361, returns the same results but only for the bit type previously set using the
"FETCh:BERRor" on page
"Integrity Indicator" on page
300.
125, Bits Tested, Bit Error Ratio
"READ:BERRor[:ALL]?"