Call Subsystem; Description; Syntax Diagrams And Command Descriptions - Agilent Technologies 8960 10 Series Reference Manual

CALL Subsystem

Description

The CALL subsystem handles all the call processing functions including mobile station (MS) and CELL setup,
control, and query functions.

Syntax Diagrams and Command Descriptions

"CALL:ACTivated" on page 227
"CALL:BA" on page 228
"CALL:BAND" on page 234
"CALL:BCCode" on page 235
"CALL:BCHannel" on page 236
"CALL:BURSt" on page 239
"CALL:CONNected" on page
240
"CALL:COUNt" on page 243
"CALL:END" on page 246
"CALL:FUNCtion" on page 249
"CALL:IMEI" on page 250
"CALL:LACode" on page 251
"CALL:MCCode" on page 252
"CALL:MNCode" on page 253
"CALL:MS" on page 254
"CALL:NCCode" on page 265
"CALL:OPERating" on page 266
"CALL:ORIGinate" on page 267
"CALL:PAGing" on page 268
"CALL:PMNCode" on page 271
"CALL:POWer" on page 273
"CALL:RFGenerator" on page 275
"CALL:SIGNaling" on page 282
"CALL:STATus" on page 283
"CALL:TCHannel" on page 286
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_description.fm
CALL Subsystem
226