How Do I Change Cell Parameters?
B. Set a cell parameter.
1
2
4
3
To Change "Network" cell parameters follow the instructions below. For all other cell parameters:
Highlight the parameter, press the knob, enter a value, and press the knob.
To Change "Network" cell parameters:
1. Highlight Cell Activated State and press the knob.
2. Set Cell Activated State to Off. (Highlight "Off" and press the knob.)
3. Set "Network" cell parameter to the desired value. (Highlight the parameter, press the knob, enter a value,
and press the knob.)
4. Set Cell Activated State to On.
540
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\gen_op_overview_cell_parms.fm